1. Converting could balance out your house
If you have all the living space you need downstairs but are lacking bedrooms and bathrooms, then a loft conversion can be the perfect way to bring your home into proportion. Most are used for an extra bedroom or two with en suite bathroom . Other popular uses include as a teenage den, cinema room or home office. If your home has amazing views, you could consider moving some of the living spaces up into the new loft to take advantage of them.
2. Almost all lofts are suitable for conversion
Lofts with a minimum head height of 2.3m are usually seen as fit to convert, although obstacles like chimneys or water tanks, as well as the pitch of the roof, can also affect this decision.
If the roof space is less than 2.3m, don’t throw away your dreams of a conversion, as there are other options available. Removing sections of the roof, or all of it, makes it possible to gain the required headspace, however, this adds to the cost and requires planning permission, unlike a more simple conversion. Alternatively, it is possible to lower the ceiling of the rooms below – again, this is a more costly. You could also opt for a modular conversion – built off site and installed afterwards.
If you’re thinking about converting your loft into a master bedroom,
see our most amazing master bedroom designs
3. You’ll get a good return on your investment
Adding a room to your house should increase its value by between £50,000 and £60,000. As most loft conversions only cost between £30,000 and £40,000 to complete, this is a considerable return on investment. Michael Holmes advises budgeting:
- £1,150-£1,350 per square metre for a basic rooflight conversion
- £1,250-£1,450 per square metre for a dormer conversion
- £1,350-£1,550 per square metre for complex options, such
as a hip-to-gable conversions
- £1,850-£2,250 per square metre for a mansard conversion
- For a modular, two-bedroom, one-bathroom loft conversion, where the new rooms are built off site and then delivered as a module ready to be installed, expect to pay from £42,000, including installation, fixtures and fittings.
4. There are six main types of conversion
Rooflight conversions require the least amount of structural work to the existing space and are therefore the most cost effective. The only changes made are the addition of windows
set into the slope of the roof, the installation of insulation, plastering, and the strengthening of the floor.
Dormer conversions are the most popular option as they are the easiest way to add light and an increased amount of roof space with full headroom. The roof structure is altered at the sides or rear of the house to add a large, flat-roofed ‘box’ dormer.
Hip-to-gable conversions are most commonly found on the side of either end-terrace or semi-detached houses. The hipped (or sloping) side roof is removed and the end wall is then built up straight to form a new vertical gable.
Gable-to-gable conversions include a new box extension that spans the space between each gable end. It is worth noting that in some case you’ll need to increase the height of the gable end walls to act as ‘bookends’.
Mansard conversions create extra volume. The process involves the replacement of either one or both roof slopes with very steep sloping sides and a flat roof over the top.
Modular extensions are used where the existing loft space is unsuitable for conversion. Measurements are taken and the new rooms manufactured off site before being delivered as a module. The existing roof is then removed and the new module installed. Try Moduloft for more.
5. It’s always worth getting the design right
‘You need to consider the layout of your completed loft conversion long before you start work. This means deciding where you will position pieces of furniture, the bathroom and any built-in storage.
If you plan on having an en suite, take into account the ceiling height in the space and prioritise pieces – namely the shower and hand basin – that cannot compromise on headroom.
The location of the stairs should also be considered during the early stages. Consider all possible options in order to maximise the space offered within your loft conversion. Decisions such as placing the door at the top or the foot of the staircase can also mean the difference between a boxy loft conversion and one that is more open.’
When it comes to the design, there are two main options:
The first is to commission a designer, such as an architect or architectural technologist, to produce drawings, which can be put out to builders on a competitive tender basis. You will be able to steer the designer to create exactly what you want, but fees for what is a relatively small project may be high as a proportion of overall costs, and you’ll also need to hire a structural engineer.
The other option is to hand the whole project over to a design-and-build contractor, who will have a designer, engineer and builders in their team. They might be less creative in design terms, but the all-inclusive price is a benefit.
6. The work will need to meet building regulations
As a loft conversion is a ‘material change of use’, building regulations must be met. These cover matters of safety, including the strength of the floor, minimum headroom above the staircase, fire escapes, thermal efficiency, electrics, plumbing and glazing. The preparation for building regulations can be completed by either the designer or loft conversion company you are working with.
7. You probably won’t need planning permission
Most loft conversions are classed as permitted development, which means planning permission isn’t required, subject to these criteria:
- Maximum of 40 cubic metres of additional roof space for terraced houses or 50 cubic metres for detached and semi-detached
- No extension is added beyond the plane of the existing roof slope at the front of the house
- No extension is higher than the existing roof’s highest part
- Materials used are similar in appearance to the existing property
- No verandas, balconies or platforms
- Side-facing windows are obscure-glazed and open 1.7m above the floor
- Roof extensions, apart from hip to gable ones, must be set back at least 20cm from the original eaves
- Extensions cannot overhang the wall of the original house
- Roof extensions are not PD in flats, listed buildings and designated areas, such as national parks, Areas of Outstanding Natural Beauty or conservation areas
- If you do need to apply for planning permission, your architect or design-and-build firm should guide you through the process
Use our free tool to find out whether you’ll need planning for your loft conversion
8. You could cut your energy bills
Adding a loft conversion provides the perfect opportunity to make your home more energy efficient, as the installation of specific insulation is a requirement of building regulations. There are two forms of insulation and a building control inspector – either an independent inspector or one from your local authority – will determine which type your home requires:
In total, 10cm of insulation is required; 7cm made up by filling the space between the rafters with foam insulation. The other 3cm of slab insulation is attached to the inside of the rafters. It’s essential that a 5cm gap be left between the roof felt and insulation to allow for ventilation.
New roof sections require either 30cm of mineral wool insulation, or 15cm foam insulation.
Foam insulation 10cm-thick is fitted over the rafters before adding capping, tile battens and tiles, this is a more complex option commonly used when a roof covering has been stripped, perhaps when creating a dormer. A 10cm-thick slab of foam insulation can insulate a dormer wall, while a 10cm-thick quilt of insulation is required between plasterboard attached to either side of an internal partition wall. You’ll need 10cm-thick insulation between floor joists.
9. You need to think carefully about the exterior
If your loft conversion will include extended sections, consider whether you want the new exterior to contrast with or complement your existing property. You could choose matching brickwork, or include rendering or cladding for a more contemporary finish.
For modern homes, frameless and minimalist-style windows are a great option. However, if you have a period property, there may be conservation requirements – such as requiring windows to sit flush with the roof – that reduce your options.
10. There will be some upheaval
If you’re having a basic rooflight or dormer conversion, then there’s no reason why you can’t stay living in your house throughout the project. Most contractors will erect scaffolding and cover any sections of roof they’re removing with tarpaulin. They will also start with the external work, meaning the majority of your house won’t be affected until they knock through and install the staircase.
If it’s a more major project, for instance where most of the roof is being replaced, then you may want to move out for a couple of weeks, particularly if the work is being done during winter. Most loft conversions will take between eight and 12 weeks to complete, while modular lofts can be installed in two weeks.