If you’re renovating your home, restoring features such as architraves and skirting boards could help create the perfect base for a stylish, modern decorating scheme. Follow renovator Sian Astley’s step-by-step guide to achieve the best results.

You’ll need:

  • A specialist paint stripping product for timber, such as Peelaway
  • Small spatula
  • Clean paint brush
  • Plastic sheeting
  • Masking tape
  • Medium-sized scraper
  • Coarse brush, such as a dish washing brush

1. Prepping architraves

Wipe away any dust from your architrave or skirting and remove, or open, doors if required.

2. Apply specialist paste

Using a spatula, apply the specialist paint stripping product for timber, such as Peelaway, to the architrave or skirting and spread evenly using a brush to reduce wastage and to make sure you get the paste into all areas.

3. Seal with plastic

Lay sections of plastic sheeting to the architrave or skirting where the stripping product has been applied. Press gently to ensure adhesion.

Expert tip

Do a small test patch before tackling the whole area to see how your paint and timber reacts to the specialist paint stripper. This will give you an idea of how long the process will take for your particular architraves and skirtings.

4. Leave overnight

Once applied, leave the area for at least 24 hours and then test a small area to see whether the paint stripper has sufficiently activated and the paint can be removed easily.

5. Scrape the paint

Using a medium-sized scraper, gently scrape away the set paint stripper and paint. Use a dish washing brush to carefully remove excess. Continue until all paint is removed.

6. Finish the look

Once all the paint has been removed, sand the timber until smooth. Then, apply a primer, undercoat and your chosen paint shade.

Sponsors