Update the look of your home inside and out by painting timber window frames in a new shade, or simply improve them with a fresh coat of paint to ensure the quality lasts. Just like painting your internal doors, or adding a new coat to your walls, repainting your window frames can be a great way of transforming the way your interior looks. Follow experienced renovator Sian Astley’s advice on how to achieve a professional finish.

You’ll need:

  • A few small paint brushes
  • Paint (water-based paints are ideal for timber and have a quicker drying time than solvent-based formulations)
  • Toothbrush
  • Sandpaper
  • Small plastic pot, such as a used, but clean yogurt or soup pot
  • Scraper
  • Masking tape
  • Cloth and water
  • Screwdriver/drill

1. Clean the surface

Before you begin, wipe the window frames down with a clean, damp cloth to make sure there’s no dirt or debris on the wood. You may like to use a sugar soap for a deeper clean, which will also help the primer and paint adhere better. Lay a dust sheet under the window if needed.

2. Sand away lumps and bumps

Use a small piece of medium-grade sandpaper to sand away any rough edges or grooves in the timber window frame, which could show up through the paint and create an imperfect result. Work on small sections at a time and use your finger to feel where the rough parts of the timber are.

3. Dust

Once you’ve smoothed the surface, use a clean, dry paint brush to brush away the dust, making sure to remove it all so none goes into the paint. Use a toothbrush to get into corners or narrow areas.

4. Remove handles

You don’t want to get paint on your handles, so it’s best to remove them at this stage. Simply use a drill or screwdriver to remove the screws and gentle pull the handle out. Keep the handle and screws in a safe place until you’re ready to reattach them.

5. Mask off the area

For perfect straight lines and to make sure you don’t get paint on the window itself, use masking tape to mask off each window pane, ensuring you stick the tape as close to the timber as possible.

6. Apply an undercoat

This is a step that is worth the extra time and effort, as an undercoat will ensure the finish lasts. Ask your local DIY store if they can apply some dye to your undercoat if you’ve chosen a specific colour as the top coat. For example, if you’re painting your timber window frames in dark grey, you could use an undercoat, which has had some grey added to it. For white finishes, stick to a simple white undercoat.

7. Paint your chosen shade

Now you’re ready to paint the window frames in your choice of colour. Start in one place and carefully work away from this and around the entire frame. Avoid starting in one place and jumping to another, which could result in ‘dry lines’ and create an uneven finish. Use a small brush and a little amount of paint and paint thin layers, rather than a thick coverage. Leave the first coat to dry completely.

8. Carefully finish the top coat

Apply the final coat of paint, ensuring that this is also a thin layer. Make sure that the whole window frame is equally covered. Leave to dry.

9. Reattach fittings

Once dry, carefully remove the masking tape. Then, use a screwdriver or drill to put the handles back into place and admire the results of your perfectly painted timber window frame.

Sponsors